Setting for loop ejection.
Setting For Loop Ejection.
This has been preset at the factory, but when the arch size is changed or IC Control Box is replaced, this needs to be reset.
Make sure strap has been loaded in the machine.
1.Turn the Tension Dial on the Operation Panel to zero.
2.Turn on the Power Switch.
3.Turn T1 timer to minimum and press START Switch to run one cycle without a package.
4.Press STOP Switch and lock it.
5.While pressing START Switch, keep the Feed/Reverse Dial twisted to the left for 3 seconds.
The Operation Ready Lamp will change from a fast blinking to a slow blinking, indicating the setting is complete.
Related Articles
Understanding the Functions on the Control Box of SQ-800 Strapack Strapping Machine with VIJAYCO
Understanding the Functions on the Control Box of SQ-800 The SQ-800 Strapack Strapping Machine is a high-speed, efficient device designed for various packaging needs. Its control box is equipped with multiple functions to ensure smooth operation and ...Resetting the Control Panel Setting to Factory default
Learn how to reset the control panel of the Strapack SQ-800 strapping machine to factory settings for optimal performance. Use VIJAYCO Hi-Speed Strapping Rolls to ensure trouble-free functioning of your Strapack strapping machine.Sealing Troubleshooting Guide for StraPack Machines
Troubleshooting Sealing Problems in Strapack Machine Issue: The Strapack machine is experiencing sealing problems, leading to incomplete or weak strap seals. Below are the main causes and step-by-step solutions to resolve the issue. Heater Cable is ...Installation Process for Strapack SQ-800 Hi-Speed Strapping Machine
A comprehensive guide on installing the Strapack SQ-800 Hi-Speed Strapping Machine, ensuring optimal performance with VIJAYCO Hi-Speed Strapping Rolls. Installation Steps: Step 1: Unpacking and setting up the SQ-800 on a stable, flat surface. Step 2: ...